Impressions from Enertex at Light & Building 2026
We introduced our Enertex® ViTa KNX, the HF presence detector integrated into the push button, as well as the new Enertex® KNX SmartMeter² with easy-to-configure energy management in the 85A and 800A variants.
With these new products, we are expanding our portfolio with a well-designed solution for presence detection and further developing our products with the SmartMeter².
Load video from www.youtube.com
You accept the Terms of Youtube if you open the Video.
We store your choice in a cookie in your webbrowser.
Details in our Privacy policy.
Training Sessions
Take part in one of our upcoming product training sessions. Training language is german.
Enertex® EibPC² / EibStudio 5
21.04.2026 - Leipzig
Enertex MeTa² KNX
22.04.2026 - Leipzig
Enertex® ViTa KNX
- Mechanical push-button sensor with one or two rockers.
- Rockers optionally usable as individual push-buttons.
- Functions for switching, dimming, colored light control, blinds control, value generation, scene recall.
- Built-in temperature and humidity sensor.
- Integrated light sensor.
- Directional motion detection via radar-based motion sensor with up to 10 m range in 3 zones.
- Presence detection up to 3-6 m.
- Presence detection with evaluation of vital movements (breathing, sitting still) up to 3 m.
- Alarm for motion detection with filter and time window function.
- Three separately configurable channels for motion/presence detection.
- Counter for incoming and outgoing movements (people counting in passage areas) as well as differential counting.
- Supports up to eight logic functions.
- Two external binary inputs, optionally usable for an external temperature sensor (e.g., Albrecht Jung Art.-Nr.: FF NTC).
- Built-in bus coupler for power supply via the KNX bus (no additional power supply required).
- Compatible with standard flush-mounted boxes.
- Compatible with Albrecht Jung Serie A.
- Variant 1181-02-AR compatible with Albrecht Jung Series A and Enertex AluRa (Enertex item no. 1178-xx-xx)
- Variant 1181-02-LS compatible with Jung frames (Albrecht Jung item no. AC 581 xy, AV 581 xy, AS 581 xy, A 5581 xy)
- Compatible with single rocker, Albrecht Jung Art.-Nr.: A 101 KO5 or single rocker Albrecht Jung Art.-Nr.: A 101 xy for single rocker operation.
- Compatible with double rocker, Albrecht Jung Art.-Nr.: A 102 KO5 or double rocker Albrecht Jung Art.-Nr.: A 102 xy for double rocker operation.
Load video from www.youtube.com
You accept the Terms of Youtube if you open the Video.
We store your choice in a cookie in your webbrowser.
Details in our Privacy policy.
Enertex® ENA²
Torben Ledermann has taken a closer look at our Enertex® ENA² on his YouTube channel.
- Secure remote access for your local network – Cloud-free, end-to-end encrypted connection between mobile device and ENA²
- Forward remote access via the Enertex relay server to connect to your local network, works with any internet provider (IPv4, IPv6, DS-Lite), no local router configuration required (optional)
- Guided browser-based configuration on device
- Easy-to-use user management
- Free DynDNS service
- Recent security standards and well-known and trusted VPN software
- NEW KNX Data Secure for sending and storing encrypted group communication
- NEW KNX timeserver
-
Integrated OpenVPN server
- Restrict user access
- Controllable via KNX
- Free client software for common operating systems (Windows, Linux, MacOS, Android, iOS)
- VPN "on demand": automatically connect to your network (iOS-only)
-
„Protected Network“
- Separate physical Ethernet interfaces (10/100 Mbit/s) for your main and protected networks
- Control forwarding and filtering
- Firewall and DHCP server
-
KNX Telegramlogger
- Records all KNX telegrams in internal database (~ 100.000.000 tel., depending on data type)
- Import ETS project for data type, topology and device information
- Easy to query and analyze telegrams on ENA² web server
- Display time-value charts, e.g. per hour, per day
- Helps to identify configuration errors, e.g., read requests without a response
- DIN rail mount (4 modules)
- Powered by an integrated bus interface
- Power consumption 1.8 W (typical workload)
Enertex® MeTa²
- KNX room controller for precise temperature control and sensor with mechanical rockers
- Front made of high-quality solid aluminum.
- High-resolution rocker displays with aging-resistant color TFT (IPS) technology and 0.1 mm resolution (480x60 pixels).
- Two-stage room temperature control with individual setpoints for heating and cooling.
- Control of up to four controller extensions
- Control of up to four split units
- Integrated three-stage fan control (fan coil actuator)
- 32 channels for switching, dimming, colored light control, tunable white control, blind control, value transmitter, scene recall and multimedia control, each with up to three sub-functions
- Built-in temperature and humidity sensor
- Integrated light sensor
- Motion detection by radar-based motion detector with a range of up to 3 m in 3 zones
- Alarm function with six configurable alarms (audible and/or visual)
- Output of three different signal tones in two volumes
- Support for up to eight logic functions
- Message function for recording and displaying up to 32 KNX events such as door contact openers
- More than 500 different icons, free choice of colors for texts and icons
- Integrated fonts for Western European and Eastern European languages, as well as Cyrillic, Greek, Hebrew, Arabic
- Separate menu rocker ("MeTa") for switching between up to ten operating pages
- Two external binary inputs, can optionally be used as an input for a remote temperature sensor (e.g. Albrecht Jung item no.: FF NTC)
- Integrated bus coupling unit for power supply via the KNX bus (no additional power supply required)
- Compatible with standard flush-mounted boxes
- Four electronically inscribable, mechanical rocker switches enable up to 80 individual switching functions
- Additional large display in age-resistant color TFT (IPS) technology offers an impressive resolution of 0.1 mm
- Visualization of PV generation, consumption, wallbox and battery storage directly on the display
- Visualization of weather forecasts (external KNX-capable server required, e.g. Enertex® EibPC²)
- Three-line freely parameterizable info display for versatile applications, such as multimedia displays or general messages.
- Large-format display of time, date, temperatures, etc.
- Dimensions: 90 x 161 x 14.6 mm
Enertex® KNX HV Dimmer 1000W/4x, 2000W/8x
- 8 dimming channels, 230 VAC, up to 250 W per channel
- DIN rail mounted device with a space-saving width of 6 modules
- Suitable for LED lamps, HV halogen lamps, and LV halogen lamps with transformer/ECG
- Support for leading edge and trailing edge phase control
- Optimum dimming behavior over the widest possible dimming range, even with problematic LED lamps, thanks to the use of innovative dimming methods: lamp correction method and low-light stabilization method.
- Smooth and harmonious dimming transitions thanks to adaptive lamp correction method (LKV) and additionally selectable dimming curves
- Low-light stabilization method (SSV) ensures stable, flicker-free light at heavily dimmed brightness levels
- Lowest losses per channel: Standby <0.2 W, full load <2 W
- Energy and electricity cost meter per channel with accurate active power measurement in accordance with accuracy class A (2%)
- Helpful commissioning and diagnostic functions via display and buttons on the device
- Automated commissioning with load detection and lamp measurement
- Overload, overvoltage, short-circuit, and temperature protection with alarm message
- Parameterizable lamp protection
- Parallel operation of up to 4 channels with 1000W total power
- Extensive application: Time-controlled dimming, sleep and wake-up light, staircase lighting function with switch-off warning, timers, scenes, bit scenes, blocking function, extensive logic functions